Transmit

This function block writes data including possibly connected SOT or EOT sequences to the configured port. It supports a maximum of 25 interfaces (see table). It is recommended to connect the input "bWrite" with an edge-triggered function block. The output "State" shows the current state.

Example of SOT/EOT:

CR, LF are defined as SOT [0] = 13 and SOT [1] = 10

Signals

Name I/O Type(s) Function
Port I WORD

Port (see table)

SOT I UCHAR Start Of Transmission Sequenz
Data I DYNTEXT Data stream (ASCII)
EOT I UCHAR End Of Transmission Sequence
bWrite I BIT Force transmit
State O UCHAR

State