Three-point term
This block implements a three-point control term.
Operation
IF X < X1on THEN Q1 <= 1
IF X > X1off THEN Q1 <= 0
IF X > X2on THEN Q2 <= 1
IF X < X2off THEN Q2 <= 0
Signals
| Name | I/O | Type(s) | Function |
|---|---|---|---|
| X | I | FLOAT | Input signal |
| X1on | I | FLOAT | Turn-on point for Q1 |
| X1off | O | FLOAT | Turn-off point for Q1 |
| X2on | I | FLOAT | Turn-off point for Q2 |
| X2off | I | FLOAT | Turn-on point for Q2 |
| Q1 | O | BIT | Binary output |
| Q2 | O | BIT | Binary output |